Automotive Braker Cleaner

Arcal Automotive Brake Cleaner is a concentrated alkaline detergent system boosted with v.o.c. compliant penetrating solvents for deep cleaning action; it really attacks that grease and brake dust.

Application: Arcal Automotive Brake Cleaner is best used when sprayed undiluted onto dirty brake surfaces to loosen and dissolve brake dust and grease. Apply until the grease and dirt are wet, let it set for 15 to 30 seconds, then hose off with a strong flush. Repeat if necessary. You do not want to let the cleaner stay in contact with shinny aluminum decorative rims or parts for too long, as it will dull the appearance.

Properties:

Appearance: Clear red solution
Specific Gravity: 1.05
Flash Point: 160'F Calculated
Odor: Fruity, cherry
pH: >12

Caution: This product is corrosive. Use goggles and rubber gloves. Do not get in eyes or on skin. Should it get in your eyes, flush with clean cool water for at least 15 minutes. Seek medical attention. If gotten on skin, flush with plenty of water. Remove contaminated clothing. See MSDS for details.

This information is believed to be authentic and correct as determined by laboratory and field-testing. No warranty or guaranteed results are express or implied due to application circumstances and usage beyond the control of the seller or manufacturer.

Arcal Chemicals, Inc.223 Westhampton Avenue Capitol Heights, MD 20743 Map 1.800.638.2672, Local: 301.336.9300 Fax: 301.336.6597