Stone Lustre

STONE LUSTRE

PRODUCT DESCRIPTION: STONE LUSTRE is a thermo plastic acrylic polymer "extreme high durability coating" that is VOC compliant in accordance with EPA regulations (REF: TABLE 1 TO SUBPART D -VOLATILE ORGANIC COMPOUND (VOC) CONTENT LIMITS FOR ARCHITECTURAL COATINGS). Stone Lustre eliminates porosity and prevents efflorescence. It is unique for its excellent adhesion along with outstanding flexibility, and freedom from tack at elevated temperatures. STONE LUSTRE forms a clear non-yellowing coating with high abrasion resistance with extreme high durability with chemical and water resistance. Coverage: approximately 250 - 400 sq. ft./gal. Available in three grades: A, B or C.

AREA OF APPLICATION: Apply STONE LUSTRE by brush, roller, or airless sprayer equipment on exposed aggregate concrete, masonry tile, brick, and other concrete surfaces. STONE LUSTRE A provides a deminished luster at (10% solids); STONE LUSTRE B provides a semi-gloss (20% solids); and STONE LUSTRE C provides a high gloss (30% solids).

DIRECTIONS: Testing an area (minimum 4 x 4) is recommended to ensure product compatibility and optimal selection of grade . Make sure surface has been previously cleaned and thoroughly dried before applying. Do not apply if rain is imminent. Apply at desired coverage rate. Your coverage rate will depend on the type of porosity of the surface and the number of coats desired..

TECHNICAL DATA: Appearance and odor: Clear solution with solvent odor. Specific gravity: 0.93- 0.95. Flash point: 80°F. Solubility in water: Negligible. Viscosity: Viscous

This information is believed to be authentic and correct as determined by laboratory and field-testing. No warranty or guaranteed results are express or implied due to application circumstances and usage beyond the control of the seller or manufacturer.

Arcal Chemicals, Inc.223 Westhampton Avenue Capitol Heights, MD 20743 - Map - 1.800.638.2672, Local: 301.336.9300 Fax: 301.336.6597